How to Use LiveSuit to Flash Firmware on Allwinner Devices
How to Use LiveSuit to Flash Firmware on Allwinner Devices
LiveSuit is a small Windows computer application that allows you to flash stock firmware (.img) on Allwinner Chipset-based devices (including Allwinner A10, A13, A20, and A31 chipsets). Here on this page, we have shared the latest version of LiveSuit and the previous versions.
Livesuit V1 07 5.rar
LiveSuit comes with the step-by-step upgrade Wizard, which helps you quickly load and flash the Firmware. Once the LiveSuit application is launched on the computer, it will automatically ask whether to enter the Upgrade Guide or Not. If you select Yes, it will start guiding the steps to load the Firmware.
To use LiveSuit, you need to download and install the Allwinner Drivers on the computer. Then, download and extract the tool on the computer and open the LiveSuit.exe file to launch the application. You also need to download the .img file of the stock firmware of your Allwinner device.
The following are the steps to use LiveSuit to flash firmware on Allwinner devices:
Launch LiveSuit.exe from the extracted folder.
Select Yes when it asks for entering Upgrade Guide.
Select Mandatory Format when it asks for Selecting Upgrade Mode.
Select Yes when it asks for Formatting Data.
Select Normal Mode when it asks for Selecting Upgrade Action.
Click on Select Img button and locate the .img file of your firmware.
Click on Yes when it asks for Confirming Image File.
Turn off your device and connect it to the computer using a USB cable while holding Volume Down or Home button.
Wait for LiveSuit to detect your device and start flashing the firmware.
Click on OK when it shows Upgrade Successful message.
Disconnect your device and reboot it.
Congratulations! You have successfully flashed firmware on your Allwinner device using LiveSuit.
If you want to download LiveSuit for Windows, Linux or Mac, you can use the following links:
For Windows: v1.05: LiveSuitPack1.05.zip[^1^], v1.06: LiveSuitPack1.06.zip[^1^], v1.07: LiveSuitPack1.07.zip[^1^] [^3^], v1.09: LiveSuitPack1.09.zip[^1^], v1.11: LiveSuitPack1.11.zip[^1^]
For Linux: v3.05 (32 Bit): LiveSuit_v3.05_for_Linux_32Bit.zip[^2^], v3.05 (64 Bit): LiveSuit_v3.05_for_Linux_64Bit.zip[^2^]
For Mac: LiveSuit_for_Mac.zip[^2^]
Here are some tips and tricks for using LiveSuit:
Make sure to backup your data before flashing the firmware, as it will erase everything on your device.
Use a good quality USB cable and a working USB port to avoid any interruption during the flashing process.
Do not disconnect or power off your device until the flashing is completed.
If you face any error or issue while using LiveSuit, you can try using an alternative tool such as PhoenixCard Tool or Rockchip Batch Tool.
If you have any questions or feedback about LiveSuit, you can leave a comment below or contact the developers at Allwinner Technology Co. LTD.
We hope this article was helpful for you to learn how to use LiveSuit to flash firmware on Allwinner devices. If you liked this article, please share it with your friends and colleagues. Thank you for reading! 29c81ba772
https://www.clicklms.org/group/mysite-200-group/discussion/5431a444-99b6-4214-8601-eafe6bb5631f